Com-file

The created command file may look like this:

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Command file "com.monte_carlo.start"
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$ Generated using LS-OPT Version 4.1
$
"Tube Crush Monte Carlo "
$
$ Created on Fri Mar  4 14:24:21 2011
solvers 1
responses 1
histories 1
$
$ PROBABILISTIC DISTRIBUTIONS
$
distribution 2
 distribution 't1' NORMAL  1  0.05  
 distribution 's1' NORMAL  1  0.05  
$
$ DESIGN VARIABLES
$
variables 2
 Noise variable 'T1' distribution 't1'
 Noise variable 'SIGY' distribution 's1'

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$      SOLVER "SOLVER_1"
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
$ DEFINITION OF SOLVER "SOLVER_1"
$
 solver dyna960 'SOLVER_1'
  solver command "ls971_R4_2"
  solver input file "tube.k"
  solver check output on 
  solver compress d3plot off 
$ ------ Pre-processor --------
$   NO PREPROCESSOR SPECIFIED
$ ------ Post-processor --------
$   NO POSTPROCESSOR SPECIFIED
$ ------ Metamodeling ---------
  solver experiment design lhd_generalized
  solver number experiments 10
$ ------ Job information ------
  solver concurrent jobs 1
$
$ RESPONSES FOR SOLVER "SOLVER_1"
$
 response 'TOP_DISP' 1 0 "BinoutResponse -res_type nodout -cmp z_displacement -id 486  -select MIN "
$
$ HISTORIES FOR SOLVER "SOLVER_1"
$
 history 'TOP_DISP_HIST' "BinoutHistory -res_type nodout  -cmp z_displacement -id 486"

$
$ NO OBJECTIVES DEFINED
$
 objectives 0
$
$ CONSTRAINT DEFINITIONS
$
 constraints 1
 constraint 'TOP_DISP'
  lower bound constraint 'TOP_DISP' -230
$
$ JOB INFO
$
analyze monte carlo
STOP